BEGIN:VCALENDAR
VERSION:2.0
PRODID:-//ChamberMaster//Event Calendar 2.0//EN
METHOD:PUBLISH
X-PUBLISHED-TTL:P1H
REFRESH-INTERVAL:P1H
CALSCALE:GREGORIAN
BEGIN:VTIMEZONE
TZID:America/Denver
BEGIN:DAYLIGHT
RRULE:FREQ=YEARLY;BYMONTH=3;BYDAY=2SU
DTSTART:20070101T000000
TZOFFSETFROM:-0700
TZOFFSETTO:-0600
TZNAME:Mountain Daylight Time
END:DAYLIGHT
BEGIN:STANDARD
RRULE:FREQ=YEARLY;BYMONTH=11;BYDAY=1SU
DTSTART:20070101T000000
TZOFFSETFROM:-0600
TZOFFSETTO:-0700
TZNAME:Mountain Standard Time
END:STANDARD
END:VTIMEZONE
BEGIN:VEVENT
DTSTART;TZID=America/Denver:20261014T080000
DTEND;TZID=America/Denver:20261014T170000
X-MICROSOFT-CDO-ALLDAYEVENT:FALSE
SUMMARY:ACI Adhesive Anchor Installer- GLENDIVE
DESCRIPTION:An Adhesive Anchor Installer is an individual who has demonstrated the ability to read\, comprehend\, and execute instructions to properly install adhesive anchors in concrete. The Adhesive Anchor Installer must also demonstrate possession of the knowledge to properly assess ambient conditions\, concrete condition\, materials\, equipment\, and tools for installing adhesive anchors and determine when it is appropriate to proceed with installation of an adhesive anchor or when additional guidance from a supervisor/foreman/project engineer is needed.\n\n\nScope and Knowledge:\n\nThis program requires demonstration of the knowledge and hands-on skills covered on the Job Task Analysis (JTA) for Adhesive Anchor Installer:\n\nJob Task Analysis (JTA) for ACI Adhesive Anchor Installer Certification\n\nThe JTA is a detailed list of specific points of knowledge and skills that may be included in the examinations for this ACI Certification program. ACI urges candidates to use the JTA to prepare for the certification exams.\n\n\nCertification Requirements:\n\nACI will grant certification only to those applicants who obtain a passing grade on both the written examination and performance examinations.\n\nThe 90-minute written examination is closed-book and consists of 75 multiple-choice questions. To pass the written exam the examinee must attain a minimum score of 74%.\nThe performance examination consists of two parts\, Part 1 (vertical down) and Part 2 (overhead):\nIn Part 1\, each examinee will be tasked with selecting\, assembling\, and using the proper tools\, equipment and materials to drill and clean a vertical down hole in concrete\, inject adhesive\, and set an anchor to the proper depth and perpendicularity. The Examiner(s) will observe and evaluate the examinees’ performance for proper procedure.\nIn Part 2\, each examinee is required to inject clear tubes with adhesive in an overhead orientation behind a blind to simulate a drilled hole in concrete using the piston plug method. The Examiner(s) will observe and evaluate the examinees’ performance for proper procedure.\n\nFollowing Part 1\, the Examiner(s) will check the vertical down installation for proper depth and plumb\; after the adhesive in the tubes injected in Part 2 has cured\, the Examiner(s) will cross section them and evaluate the size and location of air voids to determine pass or fail. This program now certifies candidates in only the piston-plug overhead installation system.\n\nA set of instructions appropriate for the exam along with applicable Material Safety Data Sheets (MSDS) will be available for consultation by the examinee during both parts of the performance exam. Both parts of the performance must be successfully completed within one year or the entire performance examination must be re-taken.\n\nCertification is valid for a period of five years from the date of successfully completing all requirements.\n\nRecertification requires successful completion of both the written and performance examinations.\n\nThis certification carries additional cost compared to other ACI certifications due to the expense of the consumables for the session.\nMembers- $550\nNon-Members $700
X-ALT-DESC;FMTTYPE=text/html:An Adhesive Anchor Installer is an individual who has demonstrated the ability to read\, comprehend\, and execute instructions to properly install adhesive anchors in concrete. The Adhesive Anchor Installer must also demonstrate possession of the knowledge to properly assess ambient conditions\, concrete condition\, materials\, equipment\, and tools for installing adhesive anchors and determine when it is appropriate to proceed with installation of an adhesive anchor or when additional guidance from a supervisor/foreman/project engineer is needed.\n\n\nScope and Knowledge:\n\nThis program requires demonstration of the knowledge and hands-on skills covered on the Job Task Analysis (JTA) for Adhesive Anchor Installer:\n\nJob Task Analysis (JTA) for ACI Adhesive Anchor Installer Certification\n\nThe JTA is a detailed list of specific points of knowledge and skills that may be included in the examinations for this ACI Certification program. ACI urges candidates to use the JTA to prepare for the certification exams.\n\n\nCertification Requirements:\n\nACI will grant certification only to those applicants who obtain a passing grade on both the written examination and performance examinations.\n\nThe 90-minute written examination is closed-book and consists of 75 multiple-choice questions. To pass the written exam the examinee must attain a minimum score of 74%.\nThe performance examination consists of two parts\, Part 1 (vertical down) and Part 2 (overhead):\nIn Part 1\, each examinee will be tasked with selecting\, assembling\, and using the proper tools\, equipment and materials to drill and clean a vertical down hole in concrete\, inject adhesive\, and set an anchor to the proper depth and perpendicularity. The Examiner(s) will observe and evaluate the examinees’ performance for proper procedure.\nIn Part 2\, each examinee is required to inject clear tubes with adhesive in an overhead orientation behind a blind to simulate a drilled hole in concrete using the piston plug method. The Examiner(s) will observe and evaluate the examinees’ performance for proper procedure.\n\nFollowing Part 1\, the Examiner(s) will check the vertical down installation for proper depth and plumb\; after the adhesive in the tubes injected in Part 2 has cured\, the Examiner(s) will cross section them and evaluate the size and location of air voids to determine pass or fail. This program now certifies candidates in only the piston-plug overhead installation system.\n\nA set of instructions appropriate for the exam along with applicable Material Safety Data Sheets (MSDS) will be available for consultation by the examinee during both parts of the performance exam. Both parts of the performance must be successfully completed within one year or the entire performance examination must be re-taken.\n\nCertification is valid for a period of five years from the date of successfully completing all requirements.\n\nRecertification requires successful completion of both the written and performance examinations.\n\nThis certification carries additional cost compared to other ACI certifications due to the expense of the consumables for the session.\nMembers- $550\nNon-Members $700
LOCATION:PO Box 1246 Glendive MT 59330
UID:e.4419.1460235
SEQUENCE:3
DTSTAMP:20260517T121409Z
URL:https://members.mtagc.org/eventcalendar/Details/aci-adhesive-anchor-installer-glendive-1729546?sourceTypeId=Hub
END:VEVENT
END:VCALENDAR